Top Notch Commercial Roofing Expands Reflective Coating Services in Ohio

How Do Roof Coating Contractors Help Commercial Buildings in Salesville, OH Cut Energy Costs?

Salesville, United States - July 20, 2026 / Top Notch Commercial Roofing /

SALESVILLE, Ohio, July 20, 2026 - Commercial building owners across southeastern Ohio are seeing measurable HVAC savings by switching from full roof tear-offs to reflective coating systems that keep rooftop surface temperatures more than 50°F cooler on peak summer days. Top Notch Commercial Roofing, a certified Conklin installer based in Salesville, OH, provides these coating applications for metal, TPO, EPDM, and built-up roofing systems, with project costs running 50% to 70% less than a complete roof replacement.

How Reflective Coatings Reduce Commercial Cooling Loads

According to the U.S. Department of Energy, conventional dark roofs can reach temperatures of 150°F or more on a sunny summer afternoon, while a reflective roof stays more than 50°F cooler under the same conditions. That temperature difference directly reduces the cooling load a building's HVAC system has to handle and can extend roof lifespan by 10 to 20 years without the expense of a full tear-off.

Commercial roof coating options vary by substrate and expected performance:

Coating Type	Solar Reflectance	Best Roof System	Expected Lifespan
Acrylic	80% to 90%	Metal, BUR, modified bitumen	10 to 15 years
Silicone	80% to 88%	TPO, EPDM, flat/low-slope	15 to 20 years
Elastomeric	75% to 85%	Metal, single-ply membranes	10 to 15 years

Top Notch Commercial Roofing applies Conklin-certified coating systems that meet these reflectance benchmarks across all three major coating categories.

Common Metal Roof Failures That Coating Systems Correct

Metal roofing contractors frequently encounter preventable failures on neglected commercial sites. The most common issues include:

Fastener back-out from thermal cycling, which is the leading source of metal roof leaks on through-fastened systems
Failed lap seam sealant creating open gaps where water migrates laterally inside panel overlaps
Surface rust progressing to through-panel corrosion within 3 to 7 years in Ohio's freeze-thaw climate

The Federal Highway Administration (FHWA) reports that Ohio experiences approximately 110 air freeze-thaw cycles per year, accelerating fastener loosening and panel degradation on exposed commercial metal buildings. A roof coating applied before rust reaches the through-panel stage costs 60% to 75% less than panel replacement.

Top Notch Commercial Roofing addresses these conditions through the Conklin MR System®, which includes sealing every fastener with Kwik Kaulk®, reinforcing seams with Spunflex® fabric, and applying a reflective top coat.

"Building owners often don't realize their roof has a narrow repair window between surface rust and through-panel perforation. Once corrosion penetrates 15% to 20% of a panel's surface, coating alone cannot restore it, and full panel replacement becomes the only option," says Joe Burkholder, Owner and Founder, Top Notch Commercial Roofing.

When Coating Works and When It Does Not

A roof coating contractor evaluates three conditions before recommending a coating system:

Structural integrity: The deck must be sound with no rot, sagging, or fastener pull-through
Moisture saturation: Insulation saturation below 25%, measured by core cuts or infrared scan
Coating adhesion potential: The existing surface must accept primer and bond properly

Roofs that fail any of these tests may require metal roof repair or flat roof repair before a coating system can be applied. The EPA's cool roof guidance confirms that reflective roofing reduces building cooling loads and lowers surrounding air temperatures, but those benefits hold only on a structurally sound substrate.

Top Notch Commercial Roofing provides metal roof installation and coating in Salesville, OH, helping commercial property owners improve roof performance, durability, and protection.

About Top Notch Commercial Roofing

Top Notch Commercial Roofing is a certified Conklin installer and ENERGY STAR partner based in Salesville, Ohio. Founded by Joe Burkholder, the company works alongside property managers and metal roof installers to deliver commercial roof restoration and reflective coating systems for commercial and industrial buildings across Southeastern and Central Ohio. Services include comprehensive roof inspections, moisture testing, maintenance programs, and full coating restoration using the Conklin product line.